|
MANUAL SEALER |
 |
SURESEAL®
High Quality, Programmable, Manual Sealer.
The SureSeal® is a High Quality Manual Sealer which has
the added benefits of accurate temperature and time
control. Through innovative design, the physical effort
utilized to operate the sealer has been considerably
reduced |
 | Features:
Controlled temperature with an accurate digital
display
Audible sealing time indicator to notify the operator
that the card is sealed properly. 2-up
configuration for efficiency
Easily adjustable pressure control
Innovative design |
|
| Benefits:
Temperature and time controls provide consistent
quality sealing of heat seal punch cards
Ergonomic design drastically reduces the physical
effort associated with repetitious manual sealing
Low cost with increased efficiency
Pre-set for optimal sealing of our heat seal cards |
|
|
AUTOMATED SEALERS |
 |
GEMINI®
Ideal for Long Term Care and Hospital Pharmacy
Providers. The Gemini® heat sealer is a 2-up mechanical
sealer that is ideal for the Long Term Care and Hospital
pharmacy provider. The compact design allows pharmacies
with space constraints to improve the packaging of
medications into punch cards. The Gemini is an
economical heat sealer that gives a consistent seal when
used with our packaging systems' punch cards. |
| FEATURES:
• Compact fully enclosed design
• Stainless steel and anodized aluminum construction
allows for easy cleaning
• Easy to set push button digital temperature read out
• An internal timing relay eliminates the under or
over sealing of punch cards
• Includes a standard 2-up configured punch card
paddle |
|
| BENEFITS:
• Temperature and time controls provide consistent
quality sealing
• Automatically opens when the cycle is complete
• Eliminates punch card pressure variants
• Optimal sealing at minimum heat levels
• Unit is shipped complete
• All settings are pre-programmed |
|
 |
AUTOBOND®
An innovative product for automated,
controlled and consistent heat sealing.
2 card / 3 card and a 4 card model available.
Controlled, Consistent Heat Sealing
AutoBond® Heat Sealers: An innovative product for
automated heat sealing of medication punch cards. Unlike
some of the sealing problems associated with manual
presses, the AutoBond® Heat Sealer consistently delivers
a scientifically controlled permanent seal....card after
card, day after day. |
|
FEATURES: |
• Easy to set temperature controls
with digital display
• Internal timing relay eliminates under or over sealing
• Shipped complete with an external air pressure
regulator for simple connection to the customer’s air
source.
• Each sealer is preset at 100 PSI for uniform pressure
sealing
• Includes a standard 2-up configured punch card paddle
• Also available in 3-up and 4-up versions
|
| BENEFITS: |
• Temperature and time controls provide consistent
quality sealing
• Automatically opens when the cycle is complete
• Eliminates punch card pressure variants
• Optimal sealing at minimum heat levels
• Unit is shipped complete
• All settings are pre-programmed
|
 |
AutoGen®
The premier all electric, (no air required) heat
sealer. Simply plug the unit into any standard 110 volt
outlet to begin operation. The AutoGen harnesses
programmable computer logic for precise operation.
Manufactured using high grade components to ensure
reliability and longevity of service. The AutoGen sets a
new industry standard for mechanical sealers, helping
the pharmacy to maintain operational efficiencies.
The AutoGen's 500 pounds of sealing force allows for a 4
second seal on punch cards. It is compact in design so
as not to take valuable pharmacy counter space. Utilizes
a standard two up paddle for the sealing of Punch
Cards and Unit Dose. |
|
FEATURES: |
• Direct drive motor / gearbox
provides over 500 pounds of sealing force
• Whisper quiet operation
• Enhanced air flow design, creates lower heated air
emissions
• Rugged stainless steel and anodized aluminum
construction, allows for easy cleaning
• Push button digital temperature controls and readout
allow the operator to accurately set sealing temperature
• Includes (1) standard configuration ˝Punch Card
Paddle˝ |
| BENEFITS: |
• Electrically driven components, no compressed
air required
• Allows for the use of either the standard 5/8˝ thick
paddle for standard 6˝ x 9˝ punch cards or a 7/8˝ thick
paddle for "Plus-Pak", multi-dose format punch cards
• All timing functions are controlled via a PLC,
(Programmable Logic Controller) for optimal sealing and
temperature performance, providing consistent quality
sealing of punch cards and unit dose packaging
• Easy operation with feather touch, two hand
anti-tie-down, sensing switches, reducing repetitive
hand motion
• Eliminates punch card pressure variants associated
with manual sealing equipment
• Precision designed and CE compliant components for
hassle free, reliable operation
• Unit is shipped complete. All settings are
pre-programmed |
